TECHZEN Zenoss User Community ARCHIVE  
FORUMS / Configuration & Administration / DISCUSSION

Fortigate Firewall

Subject: Fortigate Firewall
Author: pasan jayarathna
Posted: 2018-11-26 06:01

HI All,

I just want to monitor and get an alarm of CPU of Fortigate Firewall (https://www.fortinet.com/products/next-generation-firewall.html). i have added MIB of fortigate firewall also. but its not updating the graphs as attached print screen. kindly guide me to get an alarm.
Also, i get minor alarm for CPU as attached print screen. that value is not clear for me, please elaborate.

Thanks.

------------------------------
pasan jayarathna
sri lanka telecom
------------------------------

Attachments:

cpu.jpg


Subject: RE: Fortigate Firewall
Author: David Metcalf
Posted: 2019-04-29 14:54

You might want to take a look at this.

https://www.netnea.com/cms/2016/12/23/a-zenoss-zenpack-to-monitor-fortinet-fortigate-firewalls/

I used it a while back and it worked pretty well.

------------------------------
David
------------------------------

Subject: RE: Fortigate Firewall
Author: Jay Stanley
Posted: 2019-05-09 08:31

Or if you are looking for something simple, try building out some new templates using the following OIDs

fortiCPU = .1.3.6.1.4.1.12356.101.4.1.3.0
fortiMemory = .1.3.6.1.4.1.12356.101.4.1.4.0

------------------------------
jstanley
------------------------------


< Previous
zenoss 6.2.1 - zendmd - running commands on datasource templates failing 		  Next
Import event classes, mappings and transforms via zendmd 		>