TECHZEN Zenoss User Community ARCHIVE  

New Install of 5.1.2 serviced won't start

Subject: New Install of 5.1.2 serviced won't start
Author: Dannon
Posted: 2016-05-10 13:36

Just got done with initial 5.1.2 install following the Centos7 install guide.

I was able to log into Control Center fine and went through Zenoss setup. I then rebooted the server to be safe.

Now I can't get Control Center to start up. Output of "systemctl start serviced && journalctl -flu serviced"

[root@cabzen5 ~]# systemctl start serviced && journalctl -flu serviced
-- Logs begin at Mon 2016-05-09 14:28:28 CDT. --
getting this error: Unable to initialize devicemapper driver. Path /opt/serviced/var/volumes has an existing rsync volume driver.

Subject: Devicemapper is the new driver
Author: [Not Specified]
Posted: 2016-05-10 14:31

Check configuration about /etc/default/serviced,... change RSYNC driver by the new Devicemapper driver.Make sure first you have devicemapper storage driver and itsdisk correctly installed according to the installation guide of 5.1.2 version.

Subject: config
Author: [Not Specified]
Posted: 2016-05-10 15:08

I have a testZenoss 5.1.2 machine that is running OK...For your help , here my disk configuration (repeat the command for throubleshooting), I think zenoss doesn't detect correctly your pool configuration:

# lsblk --output=NAME,SIZE

check previous command...

Subject: Here is the output of lsblk:
Author: Dannon
Posted: 2016-05-10 15:14

Here is the output of lsblk:

< Previous
Install Core 5.1 - Cannot Install Docker
HOWto Import All traps in MIB file to create a template