TECHZEN Zenoss User Community ARCHIVE  

Zenoss Core 4.2.5 installation problem

Subject: Zenoss Core 4.2.5 installation problem
Author: [Not Specified]
Posted: 2016-02-24 10:34

Hi all,

Good to see that my user credentials from the previous forum incarnation were finally transferred ...

I set up a brand-new, virgin installation of zenoss core 4.2.5. Followed the Zenoss_Core_Installation_Upgrade_01-062014-4.2-v2 guide, fired up the server, used the setup wizard to add a user and a machine. The only additional step was adding the requirements for and enabling LDAP authentication (which works).

The problem: nothing is shown under infrastructure. The window under the devices tab is completely empty, bar the jobs indicator at the bottom right. I would expect to see the window split into infrastructure on the left, with all the organizers below it, and device listing on the right, plus add/remove/other actions buttons. Moving on to the networks tab, this works. A discovered network is shown, and the machine I defined manually is also included.

However, when I click on the link, http://server:8080/zport/dmd/Devices/Server/Linux/devices/, I am transported back to the empty infrastructure/devices tab.

I am prepared to tear down the installation and redo it, this is a test setup anyway.

Thank you.

Subject: Very interesting. The missing
Author: [Not Specified]
Posted: 2016-02-24 11:42

Very interesting. The missing categories have appeared now after a while!


What does one use for NetApp monitoring, there seems to be no more community zenpack for zenoss 4.

< Previous
Zenoss Package Install - Dependencies
Zenoss Core 5 installed but inaccessible