|
|
| Subject: | 5.0.6 becomes unstable after 24 hours |
| Author: | Jeremy Newell |
| Posted: | 2015-10-08 13:48 |
Using v5.0.6 upgraded from v5.0.3
Monitoring 33 devices. Mostly Switches via SNMP
When I first boot my centos box I have to stop zenoss.core fully. Then wait a bit for things to fully stop and then start zenoss.core again. Otherwise Zenoss.Core never fully starts.
It takes a while (10-15 min) for zenoss to fully come up. Sometimes it takes another 20 min or more before I start seeing data points in graphs.
After 24 hours I notice the graphing stops. clicking around the web site seems slow and the control center starts showing and ! marks on some of the zenoss services. I also notice that the CPUs (10 cores) all seem to be running above 90% while 20 GB of ram is mostly used up.
Any suggestions on what I should look at to fix this
| Subject: | Start by looking at the |
| Author: | Andrew Kirch |
| Posted: | 2015-10-09 13:01 |
Start by looking at the health checks in Control Center.
Andrew Kirch
akirch@gvit.com
Need Zenoss support, consulting or custom development Look no further. Email or PM me!
Ready for Distributed Topology (collectors) for Zenoss 5 Coming May 1st from GoVanguard
| Subject: | have you tried running "top" |
| Author: | [Not Specified] |
| Posted: | 2015-10-22 15:14 |
have you tried running "top" on the server where serviced is installed at least to check what might be chewing the resources.
| < |
Previous Zenoss 3.0.3 alerting rules have stopped working |
Next interface graphs become dashes |
> |