TECHZEN Zenoss User Community ARCHIVE  
FORUMS / Legacy Discussions / DISCUSSION

[SOLVED] WINRM Support

Subject: [SOLVED] WINRM Support
Author: [Not Specified]
Posted: 2014-06-02 14:53

I was unable to find sufficient documentation to troubleshoot my issue on the web so hopefully you can help me resolve it. When i add a server to zenoss monitoring and set up winrm using the user and password and keeping all other settings default, the server is flooded with constant winrm connections and holds the cpu usage at 100% till i reboot the zenoss server or remove it from monitoring. I have tried to change zwinperfmon interval to fix the issue but to no avail, It seems like instead of connecting and updating every few minutes it is connecting with no delay as the event log for winrm is populating faster that i can refresh. If anyone could provide more insight i would appreciate it.


Subject: That is strange.....what
Author: [Not Specified]
Posted: 2014-06-03 09:54

That is strange.....what settings did you use to configure WinRM and what fields did you populate under configuration properties for the server in the Zenoss Web UI

Hydruid


Subject: Resolved!
Author: [Not Specified]
Posted: 2014-06-03 11:22

Thanks for the reply, when combing through the event logs I came across id 3001 with the performance counters not performing correctly due to a malformed dword. I rebuilt the performance counters with lodctr /r and now everything is functioning as it should. It is somewhat concerning that if zenoss cannot query the information it will continue retry immediately which led to a maxed out cpu on my exchange server which was unacceptable. Glad it is fixed and up and running though. The only other issue I have open in another thread is just trying to figure out how to change the order of the graphs in the graph window.


Subject: Glad you got it worked out!
Author: [Not Specified]
Posted: 2014-06-03 11:43

Glad you got it worked out!

Hydruid


Subject: Exactly the same problem
Author: [Not Specified]
Posted: 2014-12-10 09:20

Hey. I have exactly the same problem. but i cant find an event with this id. what is see is:

2014-12-10 16:07:39,373 WARNING zen.windows: failed to stop Get-Counter on : HTTP status: 500. Der WS-Verwaltungsdienst kann die Anforderung nicht verarbeiten, weil die Anforderung ungltige Selektoren fr die Ressource enthlt. Fehler bei der Anforderung fr die Windows-Remoteshell mit der Shell-ID "CEDC28DC-9A00-4B4C-8FD3-BD808E2AEAA3", weil die Shell nicht auf dem Server gefunden wurde. Mgliche Ursachen sind: Die angegebene Shell-ID ist falsch, oder die Shell ist nicht mehr auf dem Server vorhanden. Stellen Sie die richtige Shell-ID bereit, oder erstellen Sie eine neue Shell, und wiederholen Sie den Vorgang.
2014-12-10 16:07:39,385 WARNING zen.windows: failed to stop Get-Counter on : HTTP status: 500. Der WS-Verwaltungsdienst kann die Anforderung nicht verarbeiten, weil die Anforderung ungltige Selektoren fr die Ressource enthlt. Fehler bei der Anforderung fr die Windows-Remoteshell mit der Shell-ID "56DBD585-2735-4521-9830-6F61C51505AC", weil die Shell nicht auf dem Server gefunden wurde. Mgliche Ursachen sind: Die angegebene Shell-ID ist falsch, oder die Shell ist nicht mehr auf dem Server vorhanden. Stellen Sie die richtige Shell-ID bereit, oder erstellen Sie eine neue Shell, und wiederholen Sie den Vorgang.

reported by the zenpython deamon.


Subject: Our windows ZP doesn't
Author: Andrew Kirch
Posted: 2014-12-16 16:03

Our windows ZP doesn't support I18N. You'll have to edit the templates for German

Andrew Kirch

akirch@gvit.com

Need Zenoss support, consulting or custom development Look no further. Email or PM me!

Ready for Distributed Topology (collectors) for Zenoss 5 Coming May 1st from GoVanguard



< Previous
Dropping specific events 		  Next
Number of failures before event occurs? 		>