|
|
| Subject: | SNMP agent down but snmpwalk and zenperfsnmp work |
| Author: | [Not Specified] |
| Posted: | 2014-05-23 15:25 |
The following command produces the expected output from the console of the zenoss monitoring host.
zenperfsnmp run -v10 --device=hostname.example.com
snmpwalk -v3 -l authPriv -x DES -X 1234 -a MD5 -A 234 -u zenoss hostname.example.com system
In the Zenoss Web UI I consistently get the following error when running a check on the same host
SNMP agent down - no response received
Why would it work from local console but not from the UI I have tried to remove the host and rediscover it, that did not resolve the problem. I am new to zenoss, any direction on this
| Subject: | more info |
| Author: | [Not Specified] |
| Posted: | 2014-05-23 15:42 |
This error only shows up on 1 monitored node. When I run the zenperfsnmp manually, the error is the UI goes away until the next check cycle.
| Subject: | Double check that all the |
| Author: | [Not Specified] |
| Posted: | 2014-05-27 08:37 |
Double check that all the SNMP settings are correct under the Host's Configuration Properties.
Hydruid
| Subject: | solution? |
| Author: | [Not Specified] |
| Posted: | 2014-07-31 08:53 |
Akinney, did you ever figure this out By any chance was the machine being monitored a virtual machine clone
| < |
Previous Output a datapoint in an alert message |
Next How to restore Zenoss from a backup? |
> |