---

Subject:	Can you pastebin the ouptut
Author:	[Not Specified]
Posted:	2014-05-07 08:41

Can you pastebin the ouptut of this command against one of those server

zenmodeler run -v10 device=ip-address-of-windows-server

Also for each server have you set the "zWinRMServerName" configuration property to the ip address of the server

Hydruid

---

Subject:	I downloaded th 4.2.5
Author:	[Not Specified]
Posted:	2014-05-08 04:29

I downloaded th 4.2.5 virtuell appliance, put it in vmware and installed a win2008 server there. Same problem :(
Do you use 4.2.4 or 4.2.5

This is what I used for windows RM config

winrm quickconfig
$ winrm s winrm/config/service @{AllowUnencrypted="true";MaxConcurrentOperationsPerUser="4294967295"}
$ winrm s winrm/config/service/auth @{Basic="true"}

---

Subject:	I'm using both with no issues
Author:	[Not Specified]
Posted:	2014-05-08 09:18

I'm using both with no issues. I set mine up using a group policy. Make sure you also configure Windows Remote Shell!

Hydruid

---

Subject:	Did you ever figure this one
Author:	[Not Specified]
Posted:	2014-09-26 11:06

Did you ever figure this one out I'm having exactly the same problem.

---

Subject:	Uptime Unknown
Author:	[Not Specified]
Posted:	2017-04-03 13:26

Is there any update on this issue? We have one Windows 2008 server having this issue.  We have tried to rebuild the performance counters and resync of Windows Management with no correction.  We are using Zenpack for windows 2.6.11 on Zenoss Core 5.1.10

---

Subject:	Uptime Unknown
Author:	[Not Specified]
Posted:	2017-04-03 13:26

Is there any update on this issue? We have one Windows 2008 server having this issue.  We have tried to rebuild the performance counters and resync of Windows Management with no correction.  We are using Zenpack for windows 2.6.11 on Zenoss Core 5.1.10