Subject: |
RE: Zenoss Core 6.2.1-1 JMX not getting any data from servers |
Author: |
Edward Grau |
Posted: |
2019-05-31 11:16 |
FYI, I never see the Zenoss IP hit the server on port 1099 using tcpdump.
------------------------------
Edward Grau
Infrastructure Eng.
Bridge2 Solutions
Alpharetta GA
6788317849
------------------------------
Subject: |
RE: Zenoss Core 6.2.1-1 JMX not getting any data from servers |
Author: |
Edward Grau |
Posted: |
2019-05-31 11:33 |
Seems like the zenjmx daemon is not running. How do I get it to autostart ?
------------------------------
Edward Grau
Infrastructure Eng.
Bridge2 Solutions
Alpharetta GA
6788317849
------------------------------
Subject: |
RE: Zenoss Core 6.2.1-1 JMX not getting any data from servers |
Author: |
Edward Grau |
Posted: |
2019-05-31 12:50 |
So I can get it to start if I supply the init command below from the zope container. However I should be able to set it to autostart from outside the container using command
serviced service edit zenjmx
but the return is :
service not found
I can run this from the zope container and zenjmx works. How do I make this setup to autostart ?
/opt/zenoss/bin/python /opt/zenoss/ZenPacks/ZenPacks.zenoss.ZenJMX-3.12.1-py2.7.egg/ZenPacks/zenoss/ZenJMX/zenjmx.py --configfile /opt/zenoss/etc/zenjmx.conf --cycle --daemon
------------------------------
Edward Grau
Infrastructure Eng.
Bridge2 Solutions
Alpharetta GA
6788317849
------------------------------
Subject: |
RE: Zenoss Core 6.2.1-1 JMX not getting any data from servers |
Author: |
Edward Grau |
Posted: |
2019-05-31 13:32 |
Ok, I got it fixed. I had to uninstall the JMX from the original image and reinstall a separate zenpack of the same version.
------------------------------
Edward Grau
Infrastructure Eng.
Bridge2 Solutions
Alpharetta GA
6788317849
------------------------------
Subject: |
RE: Zenoss Core 6.2.1-1 JMX not getting any data from servers |
Author: |
Jay Stanley |
Posted: |
2019-06-07 09:07 |
FYI,
Auto start of zenoss daemons can be set within the Zenoss UI as well..
Under Advanced > Control Center
------------------------------
jstanley
------------------------------