Zenoss ZenTech Community

I am using Zenoss Core 3.2.1 and everything is working fine, Recently i have added a DELL TapeLibrary TL2000 In zenoss and it sucussfully added in zenoss. After some minutes zenoss give event "SNMP Agent Down" but when i issue snapwalk on same device it working fine. Below is the pasted snmpwalk of the same device.

==== TAPELIBRARY ====
snmpwalk -v1 -cCOMPANY172.16.5.85 system
SNMPv2-MIB::sysDescr.0 = STRING: TAPELIBRARY
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.674.10893.2.102
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (129599599) 14 days, 23:59:55.99
SNMPv2-MIB::sysContact.0 = STRING:
SNMPv2-MIB::sysName.0 = STRING: C3TAPELIBRARY.feroze1888.com
SNMPv2-MIB::sysLocation.0 = STRING: unknown
SNMPv2-MIB::sysServices.0 = INTEGER: 79

Subject:	So does Zenoss have
Author:	Jane Curry
Posted:	2016-12-14 08:13

So does Zenoss have Confiuration Properties for this device with zSnmpVer = v1 and zSnmpCommunity=COMPANY to match your snmpwalk

Cheers,

Jane

Email: jane.curry@skills-1st.co.uk Web: https://www.skills-1st.co.uk

Subject:	Yes Version = 1 and SNMP
Author:	[Not Specified]
Posted:	2016-12-14 21:47

Yes Version = 1 and SNMP Community =COMPANY have been configured.

Subject:	How about the
Author:	Jane Curry
Posted:	2016-12-15 04:00

How about the zSnmpMonitorIgnore flag - should be false.

Make sure you close any SNMP agent down events, then remodel the device. Do you see components for this device - interfaces, etc If you do then some SNMP queries obviously are working.

How about going to the main page for the device and use the Commands button (bottom-left) and try the snmpwalk command from there.

What device class is this device in

Cheers,

Jane

Email: jane.curry@skills-1st.co.uk Web: https://www.skills-1st.co.uk

Subject:	SNMP Agent Down but SNMPWALK Is Running Fine for DELL TapeLibrary TL2000
Author:	[Not Specified]
Posted:	2016-12-14 03:24

SNMP Agent Down but SNMPWALK Is Running Fine for DELL TapeLibrary TL2000