|
|
| Subject: | zen.ZenModeler: Can't find 'id' after self.objectMap(iface) -- ignoring this interface |
| Author: | [Not Specified] |
| Posted: | 2016-02-18 06:22 |
Suddenly I am running into a problem with zenoss 4.2.3! The problem is that the system spits out a ton of these messages :
zen.ZenModeler: Can't find 'id' after self.objectMap(iface) -- ignoring this interface
The problem devices is our Cisco ASR9k's and results in that I do not get most of the interfaces into zenoss.
Read an article that mentions http://dev.zenoss.org/trac/ticket/4988 and zenpatch 13482, but here the trail goes dead.
Does anybody have a clue as how to fix this problem
| Subject: | If I run this command from |
| Author: | [Not Specified] |
| Posted: | 2016-02-26 06:02 |
If I run this command from cli it does not work :
zenmodeler run -v10 --device=test.testlab.dk
and this message keeps repeating :
DEBUG zen.ZenModeler: Running 1 clients
If I run this command it works :
zenmodeler run -v10 --device=test.testlab.dk --collect="zenoss.snmp.InterfaceMap"
Does anybody have an idea as to what could be wrong
| < |
Previous What is the correct way to scale Zenoss 5? |
Next Monitor FTP server with Zenoss Core 4.2.4 |
> |