|
|
| Subject: | Zenoss 5.0.3 Ping Interval |
| Author: | [Not Specified] |
| Posted: | 2015-07-22 04:19 |
Hi,
Where can I change the Zenoss default ping interval
Currently also using the "PING" data source, I changed the cycle time to 600 seconds but on my graphs it still gets plotted every 300 seconds.
Any ideas
| Subject: | in 5.x it may be |
| Author: | Andrew Kirch |
| Posted: | 2015-07-22 11:04 |
in 5.x it may be interpolating for "missed" pings. You may be seeing a graph artifact rather than an actual ping cycle issue. Check the ping logs, and maybe do a tcpdump on the remote host to confirm you have a ping interval problem.
Andrew Kirch
akirch@gvit.com
Need Zenoss support, consulting or custom development Look no further. Email or PM me!
Ready for Distributed Topology (collectors) for Zenoss 5 Coming May 1st from GoVanguard
| Subject: | I checked tcpdump, and it |
| Author: | [Not Specified] |
| Posted: | 2015-07-23 04:50 |
I checked tcpdump, and it shows that Zenoss pings every 5 minutes.
What else can I check I have tried restarting the zenping daemon to no avail.
09:05:44.913494 IP 10.16.100.88 > 172.18.3.5: ICMP echo request, id 24268, seq 0, length 8
09:05:44.914099 IP 172.18.3.5 > 10.16.100.88: ICMP echo reply, id 24268, seq 0, length 8
09:10:30.300992 IP 10.16.100.88 > 172.18.3.5: ICMP echo request, id 12865, seq 0, length 8
09:10:30.301603 IP 172.18.3.5 > 10.16.100.88: ICMP echo reply, id 12865, seq 0, length 8
09:11:51.182550 IP 10.16.100.88.33355 > 172.18.3.5.snmp: GetRequest(30) E:43434.3.2
09:11:51.191422 IP 172.18.3.5.snmp > 10.16.100.88.33355: GetResponse(31) E:43434.3.2=1
09:15:42.367127 IP 10.16.100.88 > 172.18.3.5: ICMP echo request, id 18774, seq 0, length 8
09:15:42.367739 IP 172.18.3.5 > 10.16.100.88: ICMP echo reply, id 18774, seq 0, length 8
09:20:39.633049 IP 10.16.100.88 > 172.18.3.5: ICMP echo request, id 9501, seq 0, length 8
09:20:39.633681 IP 172.18.3.5 > 10.16.100.88: ICMP echo reply, id 9501, seq 0, length 8
| Subject: | I guess that your solution |
| Author: | Jan Garaj |
| Posted: | 2015-07-23 13:21 |
I guess that your solution will be config of zenping daemon.
Devops Monitoring Expert advice:
Dockerize/automate/monitor all the things.
DevOps stack:
Docker / Kubernetes / Mesos / Zabbix / Zenoss / Grafana / Puppet / Ansible / Vagrant / Terraform /
Elasticsearch
| Subject: | Does anyone have any ideas |
| Author: | [Not Specified] |
| Posted: | 2015-08-11 07:22 |
Does anyone have any ideas for me to try
| Subject: | Fixed it by doing the |
| Author: | [Not Specified] |
| Posted: | 2015-08-19 02:38 |
Fixed it by doing the following:
Advanced>Control Center>Localhost->Details
Changed the Ping Cycle Interval value to 600 and voila.
| < |
Previous Two Events Transform into One? |
Next Cannot model newly added decvices |
> |