|
|
| Subject: | Polling interface status in zenoss5 |
| Author: | [Not Specified] |
| Posted: | 2015-04-21 20:15 |
Has anyone successfully used this in Zenoss5
http://wiki.zenoss.org/Template_Tip:_Polling_Interface_Status
The interface status part works for me, but i'm having issues with the Last Change part where the event count continues to increment every 5 minutes no matter what if a change is detected or not.
zenoss ~]# snmpwalk -v2c -c public 192.168.0.25 1.3.6.1.2.1.2.2.1.9
IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.3 = Timeticks: (43131849) 4 days, 23:48:38.49
Snmpwalk command isn't changing but zenoss continues setting an event every 5minute poll cycle.
| Subject: | anyone? |
| Author: | [Not Specified] |
| Posted: | 2015-05-22 14:13 |
anyone
| Subject: | Hi Mdelise, |
| Author: | [Not Specified] |
| Posted: | 2015-05-25 03:10 |
Hi Mdelise,
I also got these issues, I had to disable the snmp poll for ifoperstatus for this to disappear.
My thread: http://www.zenoss.org/forum/9151
I think this is what you are talking about ;)
| Subject: | Diabolix - This is a |
| Author: | [Not Specified] |
| Posted: | 2015-05-27 09:47 |
Diabolix - This is a different issue i'm having. Its suppose to set an event once when it detects a change in the NIC status. It works properly in 4.2.5 but something has changed in 5.x causing the constant repeat event every 5min (poll cycle) It continues counting up.
http://wiki.zenoss.org/Template_Tip:_Polling_Interface_Status
| < |
Previous Interface utilization treshold and 1 minute polling |
Next why available update is 4.2.5 in zenoss 5? |
> |