|
|
| Subject: | ZenPack doesn't diplay some components in Zenoss 5 |
| Author: | Jane Curry |
| Posted: | 2015-10-30 13:25 |
I am using my slightly amended version of Shane's ZenPacks.ShaneScott.ipSLA/ ZenPack which works perfectly well against my test device with Zenoss 4.2.5 and shows 6 SLA components correctly.
Having ported it to Zenoss 5, it only shows 1 of the 6 SLAs - the one it show appears fine, both in the top half of the component display and the graphs.
The other five SLAs definitely have been modeled correctly in the ZODB - they just don't display.
Having had a bit of a dig with Firebug and Google, I believe I am getting the following message which seems to suggest a server problem
server does not support RFC 5746, see CVE-2009-3555
I don't think the issue is in the browser - i've used exactly the same browser as I am using successfully with my Zenoss 4 implementation.
Any help gratefully received.
Cheers,
Jane
Email: jane.curry@skills-1st.co.uk Web: https://www.skills-1st.co.uk
| Subject: | I don't know this zenpack, |
| Author: | Jan Garaj |
| Posted: | 2015-10-30 21:04 |
I don't know this zenpack, but I give a point:
Zenoss 4: Browser -> Zenoss 4 (Zope, ...)
Zenoss 5: Browser -> Control Center (serviced) -> Dockerized Zenoss 5 (Zope, ...)
Probable cause is how man in the middle (Control Center in this case) handles your connection.
Devops Monitoring Expert advice:
Dockerize/automate/monitor all the things.
DevOps stack:
Docker / Kubernetes / Mesos / Zabbix / Zenoss / Grafana / Puppet / Ansible / Vagrant / Terraform /
Elasticsearch
| Subject: | Hello Jane. |
| Author: | ValeruS |
| Posted: | 2015-12-30 01:18 |
Hello Jane.
I installed Scott SLA zenpack on zenoss 3.x and its worked.
Some years a go we migrating to zenoss 4.x version and Scott SLA zenpack not worked.
Can you share "YOUR" modified SLA zenpack witch work on zenoss 4.2.5
Thanks.
| Subject: | My updated version, tested on |
| Author: | Jane Curry |
| Posted: | 2016-01-05 12:19 |
My updated version, tested on 4.2.5, is at https://github.com/jcurry/ZenPacks.ShaneScott.ipSLA .
Please let me know if it works for you.
Cheers,
Jane
Email: jane.curry@skills-1st.co.uk Web: https://www.skills-1st.co.uk
| Subject: | Hello and Thaks. |
| Author: | ValeruS |
| Posted: | 2016-01-06 03:21 |
Hello and Thanks.
But I can't install zenpackZenPacks.ShaneScott.ipSLA-3.5.4-py2.7.egg
Some error occurred
ConflictError: database conflict error (oid 0x0e2412, class Products.ZenModel.OperatingSystem.OperatingSystem, serial this txn started with 0x03b447f6daed5811 2016-01-06 07:50:51.311045, serial currently committed 0x03b4483b95bab722 2016-01-06 08:59:35.092818)
zenup status
Product: zenoss-core-4.2.5 (id = zenoss-core-4.2.5)
Home: /opt/zenoss
Revision: 457
Upgrading: None
Minimum: 457
Updated On: Wed Jun 3 12:34:40 2015
| Subject: | That may not be to do with |
| Author: | Jane Curry |
| Posted: | 2016-01-06 03:49 |
That may not be to do with the ZenPack. I would run the toolbox utilities to check your ZODB database - http://wiki.zenoss.org/Troubleshooting_Zenoss_PosKey_Errors .
If they run clean, try again. This might be a transient error.
Cheers,
Jane
Email: jane.curry@skills-1st.co.uk Web: https://www.skills-1st.co.uk
| Subject: | Hello Jane. |
| Author: | ValeruS |
| Posted: | 2016-01-11 08:12 |
Hello Jane.
I installed zenpack on testing zenoss server, the installation was successful.
Appeared SLA tab with SLA: Events,Names,Monitored(grey out),Locking
but without any graphics.
Device modeling show output with some ....
zen.ZenModeler: DEBUGGER Target unpack hiccup
zen.ZenModeler: DEBUGGER NS unpack hiccup
.....
Output is very large and I can't post here.
| < |
Previous zendmd: command not found. (auto-deploy installation) |
Next Change hostname/ip and/or restore backup in a new installation. |
> |